|
The pattern piece is laid out on the fabric
|
|
Seam allounces are add to the chalk outline from the pattern (also missing top of pattern piece do to paper size is free handed in).
|
|
Showing of the leg piece cut out.
|
|
Showing both leg pieces that have been sewn together, side by side
|
|
Both leg pieces have been sewn together at the crotch, to a point in the front that have been left open
|
|
Top Part of the outer shell has been folded over 1/2 inch and ready for cartigde pleteing
|
|
The pattern piece for the linning is laid out of the linning fabric
I have skiped the chalk out line and fabric cut pieces pic, but are pretty mch the same as the outer shell
|
|
Both leg linning pieces that have been sewn togther
|
|
Both leg pieces of the linning have been sewn together at the crotch to a point in the front
|
|
These pieces are the linning, inner-linning, and outer-shell of the waist band
The pieces are cut much wider then needed, they will be cut down when fitted with the doublet
the curve on the waist band matchs that of the doublet
|
|
The Outer Shell and inner lining are sewen together
|
|
Bias tape made from gold silk
|
|
Bias tape is put on the edging, current the back is just pined
|
|
Close up of the edge
|
|
Close up of the edge and flat felled seam
|
|
Showing the back with the edging whip stitched down
|
|
Outer shell with the cartigde pleteing.
|
|
Waste Band pinned to the Outer-Shell
|
|
Front of the Venetians with waistband and outer-shell attached
|
|
Back of Venetians with the waseband and outer-sell attached
|
|
Inside of the Venetians showing the stitching attaching the outer-shell to the waistband
|
|
Linning completed and ready to be added
|
|
linning and outshell attached
after test fitting with the doublet it was decided to tapper the front.
|
|
looking into into the waist area
|
|
laid out with the doublet
|
|
Another view with the doublet
|
|
Completed Doublet and venetians laced together
|
|
inside view of doublet and venetians
|
|
View of the venetians and doublet hanging
|